Hyco Wave Instantaneous Hand Wash 3.0 kW Manual – HW30M
Part No Description
HW30M Wave Instantaneous Hand Wash 3.0 kW Manual
Usage:
Designed for light hand washing at a single basin.
Features
• Unlimited hot water for light hand washing at a single washroom basin
• Designed and assembled in the UK
• Stylish and compact ergonomic design
• Energy efficient – heats water instantly at point of use so no long pipe runs and no standing heat losses
• 3.0 kW element
• Cost effective hot water for hand washing
• Integral inlet tap and swivel 200mm spray arm
• Optimised spray head to prevent splashing
• Durable easy to clean cover
• Simple to install and use
Manual Unit
• Separate on/ off and temperature and flow rate control
• No need to re-calibrate flow rate every usage
• Correct temperature instantly achieved every time
Automatic Unit
• Automatic no touch operation
• Manual temperature and flow rate control
Technical Specification
Outer Casing
Easy clean high impact Polycarbonate/ ABS
Heating Element
Copper-sheathed coil
Water Container
Glass reinforced nylon
Controls
On/ Off:
HW30M Rotary switch
HW30A Automatic no touch operation
Temperature Selection:
HW30M and HW30A Rotary dial
Safety
Self re-setting thermal cut-out set at 60°C.
Manual resettable cut-out set at 90°C.
Pressure relief valve to prevent high-pressure build up.
Temperature stabilised – unit maintains consistent outlet temperature as water pressure conditions vary.
IP Rating
IPX4
Installation
The appliance must be installed in a frost free environment.
Wall mounted. Base assembly is secured to the wall by two fixing screws. Full fixing pack supplied.
Plumbing
Must be installed by a suitably qualified person.
Minimum water pressure 1 bar.
Maximum water pressure 6 bar.
Water Connection
Inlet 1 x 15mm compression.
Outlet 1 x push fit chrome plated brass spray arm 200mm (8″).
ONLY USE THE FITTINGS SUPPLIED SO THAT THE UNIT IS NOT PRESSURISED.
Fittings required (not supplied): none.
Electrical Connection
Installation must comply with current IEE regulations
This product should be connected to the fixed wiring of the property via a double pole fused spur with a minimum break capacity of 13 amps.
Approvals
CE, WRAS
Standard Warranty
1 year parts or replacement warranty.
Data Tables
Product Code | Power (kW) | On/ Off Control | Max Flow Rate (l/m) Hand wash * | Standing Loss (kWh/day) |
---|---|---|---|---|
HW30M | 3.0 | Manual | 1.7 | 0.0 |
HW30A | 3.0 | Auto | 1.7 | 0.0 |
*Flow rate based on incoming water supply temperature of 13°C, hand wash at 38°C
Product Code | Height* (mm) | Width (mm) | Depth * (mm) | Weight Empty (kg) |
---|---|---|---|---|
HW30M | 170 | 240 | 100 | 1.5 |
HW30A | 170 | 240 | 100 | 1.5 |
*Dimensions excluding spout.