Andersen A2 EV Charger 7kW 8.5m Tethered Cable Nearly Black – Nearly Black – A2.7.NBNB8.5
Part No Description
A2.7.NBNB8.5 A2 EV Charger 7kW 8.5m Tethered Cable Nearly Black – Nearly Black
- Compatible with all type 2 electric and hybrid cars
- CE certified
- 3 years of Andersen care cover (subject to warranty terms)
- No need for earth rods, this allows for a cheaper, quicker installation
Body: Nearly Black
Front: Nearly Black
(Any colour combination is possible – see data sheet for full list of colour options)
kW: 7
Cable: 8.5m
Charging Specification
7kW
IEC 61851-1 mode 3
Compliance with IEC 62196-2
Operating Specifications
Humidity to 95% RH non condensing
-25 Celsius to +45 Celsius
KØNNECT+ Smart Charge
Remote software locking of the unit
Charge reporting
Charge time scheduler
Over the Air Update
Solar Monitoring
Up Stream Protection
40a Type A RCBO (61009) or
Type A RCD (61008) + 40a B curve MCB
(60898)
Standards
CE Certified
OZEV accredited
Device Connection
802.11 b/g/n support
802.11 n (2.4 GHz), up to 150 Mbps
Bluetooth 5 (setup only)
Installation Method
Mounted to a permanent structure
Installed between 0.75m – 1.2m from
ground level
IP65 can be installed indoors or
outdoors
Adaptive Load Management
Wired current sensor
Current reducing hardware
Peak load monitoring
Security
Remote software enabled charge point
locking
128-bit data SSL AES encryption for
smart connectivity
Bluetooth with TLS encryption
Fault Monitoring
Realtime health monitor system
Start up self test
Earth monitoring
Welded contactor monitor
PME monitoring
Light Features
Front LEDs status
Courtesy light
Internal Electrical Specification
Supply voltage 230v/400v AC
Supply Frequency 50/60 Hz
6mA DC protection
O-PEN technology conforming to
722.411.4.1 (iii) (iv)
Device Support
Apple iOS mobile device.
Android mobile devices
Dimensions
494 x 348 x 148 mm (metal) 156mm
(wood),
(inc 5mm wall spacer)
Cleaning
Inbuilt brushes clean cable when
returned to unit after use
Enclosure Material
Aluminium
Accoya® wood
Polycarbonate blend
Plug Compartment
Magnetic lid for convenient access
Courtesy light
Evoflek Cable
Tethered 7kW cable (5.5m or 8.5m*)
High-performance ultra flexible cable
Can be wound clockwise or anticlockwise Modular fitment for easy maintenance
Enclosure and plug compartment IP65
Type 2 plug IP44 *
*IP44 only maintained if the protective rubber cap is fully secured onto the plug when the charge point is not in use
Warranty
Refer to warranty terms – https://andersen-ev.com/warranty-terms/
IP Rating
Enclosure and plug compartment IP65
Type 2 plug IP44